|  |
| Product Detail |
|
EPS-H309NV
 - EPS-H309NV-- 36" Metal Power Strip with 9 Outlets,
Hardwired Type
This hard wired type power strip is good
for installation in your kitchen, cabinet and so on. It is not for
normal wall outlets. There is no plug and power cord with this unit.
Features
- 3 ft (0.91m) Durable
Metal Housing Power Strip
- 9 Black US
Standard Outlets, Vertical Outlet Orientation
- Hard Wired without
Power Cord for Mounting at Your Desired Location
- 6
Easily Punched off Knockouts
on Each Side - on Top, Both Sides, the Bottom Cover and
Both Ends
- Easy On/Off Back
Cover (only 2 Screws)
- Wires Readily Cut for Easier Removal and Faster Installation
- Installation by professional
electricians only (OR DANGER:
Electric Shock)
|
Model #:
|
EPS-H309NV
|
|
Description:
|
36” 9 Outlet Hardwire
Type Metal Power Strip
|
|
Power Strip Measurement:
|
36" x 1.575" x 1.417”
(914mm x 40mm x 36mm) *
|
|
Outlets:
|
9
|
|
Outlet Color:
|
Black
|
|
Outlet Orientation:
|
Vertical
|
|
Receptacle Type
|
NEMA 5-15R
|
|
Outlet Spacing
|
3½" or
89mm
(center to center)
|
|
Knockout Cord Exit:
|
6
(Top, Bottom Cover,
Both Sides & Both Ends)
|
|
Voltage Input/Output:
|
110-125V 60Hz
|
|
Current Input:
|
15A
|
|
Full Load:
|
1875VA
|
|
On/Off Switch:
|
N/A
|
|
Circuit Breaker:
|
N/A
|
|
Surge Protection:
|
N/A
|
|
Indicator:
|
N/A
|
|
Noise Filter:
|
EMI/RFI
|
|
Mounting on Back:
|
N/A
|
|
Mounting Tabs:
|
On both ends (5/8”) with
butterfly holes (Click here )
|
|
Mounting Brackets:
|
N/A
(order separately if needed)
|
INSTALLATION PROCEDURE:
Before installation, you will need to get a 3/4" wire
clamp and 3
wire connectors from your local hardware or
electric supply or home improvement store.
Minimum tool required: A fine to medium fine philips screw driver
- Turn off electricity in
the house
- Decide where to place
this unit
- Choose the right side
for cord exit and mark on the knockout round section
- Gently punch off the
knockout round section chosen with a screw driver or other tool handy
- Unscrew the cover off
the back of the power strip
- Install the 3/4" wire
clamp you already have
- Run the wires through
the wire clamp
- Match the color of the
wires and connect them properly with terminal connectors
- Tighten the wire clamp
properly
- Put back the cover
- Mount the strip where
you want it to be
- Turn electricity back on
WARNING:
You must be an electrician or an
electric engineer to do the installation work.
Note:
* For installation purpose: The length of the power strip does not
include the mounting tabs at
both ends; The width does not include the size of screws; The height
does not include the receptacles.
Important:
This unit is not
intended for use in or around wet or potentially wet areas including,
but not limited to, aquariums, saunas, showers and fountains.
We also custom
manufacture for our customers.
▲
top------------
| | Show Related Products |
|
