|  |
Click here for bigger image
 | | Product Name: | EPS-H309NVW -- 36" 9 Outlet Hardwired Power Strip, White | | Our Price: | $25.99 | | Availability: | In Stock | | Product Number: | EPS-H309NVW | | Rating: |  |
|  |
| Product Detail |
|
EPS-H309NVW
 - EPS-H309NVW-- 36" Metal Power Strip with 9 Outlets,
Hardwired Type, White
This hard wired type power strip is good
for installation in your kitchen, cabinet and so on. It is not for
normal wall outlets. There is no plug and power cord with this unit.
Features
- 3 ft (0.91m) Durable
Metal Housing Power Strip, White
- 9 Black US
Standard Outlets, Vertical Outlet Orientation
- Hard Wired without
Power Cord for Mounting at Your Desired Location
- 6
Easily Punched off Knockouts
on Each Side - on Top, Both Sides, the Bottom Cover and
Both Ends
- Easy On/Off Back
Cover (only 4 Screws)
- Wires Readily Cut for Easier Removal and Faster Installation
- Mount with Spring Brackets
- Installation by professional
electricians only (OR DANGER:
Electric Shock)
|
Model #:
|
EPS-H309NVW
|
|
Description:
|
36” 9 Outlet Hardwire
Type Metal Power Strip, White
|
|
Power Strip Measurement:
|
L36" x W1.575" x H1.417”
(914mm x 40mm x 36mm) *
|
|
Outlets:
|
9
|
|
Outlet Color:
|
Black
|
|
Outlet Orientation:
|
Vertical
|
|
Receptacle Type
|
NEMA 5-15R
|
|
Outlet Spacing
|
3½" or
89mm
(center to center) *
|
|
Knockout Cord Exit:
|
6
(Top, Bottom Cover,
Both Sides & Both Ends)
|
|
Voltage Input/Output:
|
110-125V 60Hz
|
|
Current Input:
|
15A
|
|
Full Load:
|
1875VA
|
|
On/Off Switch:
|
N/A
|
|
Circuit Breaker:
|
N/A
|
|
Surge Protection:
|
N/A
|
|
Indicator:
|
N/A
|
|
Noise Filter:
|
N/A
|
|
Mounting on Back:
|
N/A
|
|
Mounting Tabs:
|
N/A
|
|
Mounting Brackets:
|
2 x ¾” (19mm)
Spring Clips (Click here) |
INSTALLATION PROCEDURE:
Before installation, you will need to get a 3/4" wire
clamp and 3
wire connectors from your local hardware or
electric supply or home improvement store.
Minimum tool required: A fine to medium fine philips screw driver
- Turn off
electricity in the house
- Decide where
to place this unit
- Choose the
right side for cord exit and mark on the knockout round section
- Gently punch
off the knockout round section chosen with a screw driver or other tool
handy
- Unscrew the
cover off the back of the power strip
- Install the
3/4" wire clamp you already have
- Run the
wires through the wire clamp
- Match the
color of the wires and connect them properly with terminal connectors
- Tighten the
wire clamp properly
- Put back the
cover
- Mount the
strip where you want it to be
- Turn
electricity back on
WARNING:
You must be an electrician or an
electric engineer to do the installation work.
Note
:
* The measurement is approximate. For installation purpose: The length
of the power strip does not include the mounting tabs at both ends; The
width does not include the size of screws; The height does not include
the receptacles.
Important:
This unit is not intended for use in or around wet or potentially wet
areas including, but not limited to, aquariums, saunas, showers and
fountains.
We also custom
manufacture for our customers.
▲top
------------
| | Show Related Products |
|
