New Page 2
--
EPS-4129BL
48" 12 Outlet Metal Power Strip with Surge Protector
This high quality power
strip bar is ideal for use with various electric and electronic appliances,
devices such as computers, audio and video equipment, power tools and instrument
in the office building, in the garage at home, in the warehouse, factory, on the
production line or manufacturing facilities. Better protection against power
surge.
Features
9
ft (2.74m) 14/3 AWG, SJT heavy duty Power Cord
On/Off Switch with
15Amp resettable Circuit Breaker
Surge protected up to
1824 Joules
Green LED Indicators
for grounding and surge protection working conditions in the circuit
ETL (Conforms to UL
Std. 1363 and CAN/CSA Std. C22.2 No. 14) approved and listed
Electrical ratings:
125V/15A/1875W
Mounting on back with
additional mounting brackets
Ample space between
Outlets for big and bulky Power Supplies
Solid and sturdy feel
Plug-in and play
|
Model #: |
EPS-4129BL |
|
Description: |
48” 12 Outlet Metal Power Strip |
|
Power Strip Measurement: |
48”x1.575”x1.417” (1219x40x36mm) * |
|
Outlets: |
12
|
|
Outlet Color: |
Light gray |
|
Outlet Orientation: |
Horizontal |
|
Plug / Receptacle Type |
5-15P / 5-15R |
|
Outlet Spacing: |
3¾" or 95mm (center to center) |
|
Power Cord: |
9’ (2.74m) 14/3 AWG, SJT Heavy Duty |
|
Voltage Input/Output: |
110-125V 60Hz |
|
Current Input: |
15A |
|
Full Load: |
1875VA |
|
On/Off Switch: |
Yes (without light) |
|
Circuit Breaker: |
Resettable (built in switch) |
|
Surge Protection: |
Up to 1824 Joules |
|
Lines Protected: |
(L-N) (L-G) (N-G) |
|
Response time: |
Less than 5 nanosecond |
|
Noise Filter: |
EMI/RFI |
|
Mounting on Back: |
Yes (Click
here to see) |
|
Mounting Tabs: |
N/A |
|
Mounting Brackets: |
2 x ¾” (19mm) Spring Clips (Click
here) |
|
Indicator: |
Green LED Grounding and Green LED Surge Protection |
Note:
* The width of the power strip does not include the size of screws, and the height does not include the receptacles.
Important:
1. It is not advisable to use this unit on a GFI (or GFCI - Ground Fault Circuit Interrupters) Outlet (as shown below), as the Grounding Indicator in the circuit would likely trip the GFI, which would not automatically reset.
2.
This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.
We also custom manufacture
for our customers.
▲ top------------
